Subscribe to Our Youtube Channel
Related Manuals for Rohnson R-2202
Summary of Contents for Rohnson R-2202
- Page 1 Crepe Maker R-2202 Instructions Manual Crepe Maker R-2202 For your safety and continued enjoyment of this product always read the instruction book carefully before using...
-
Page 2: Important Safeguards
Crepe Maker R-2202 IMPORTANT SAFEGUARDS • READ ALL INSTRUCTIONS • Use only on AC 220-240 Volt, 50/60 Hz. Use only for household. • By ignoring the safety instructions the manufacturer can not be hold responsible for the damage. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. - Page 3 Crepe Maker R-2202 • Keep the appliance and its cord out of reach of children less than 8 years. • The temperature of accessible surfaces may be high when the appliance is operating. • The appliance is not intended to be operated by means of an external timer or a separate remote-control system.
-
Page 4: Description Of Parts
Crepe Maker R-2202 DESCRIPTION OF PARTS 1. Non-stick Plate 2. Ready Light (Green) 3. Power Light (Red) 4. Temperature control knob 5. Anti-slip feet 6. Decorative panel... -
Page 5: Before First Use
Crepe Maker R-2202 BEFORE FIRST USE • Read all instructions carefully and keep them for future reference. • Remove all packaging. Remove the stickers, protective foil or plastic from the device and clean the appliance. (See cleaning and maintenance.) •... -
Page 6: Cleaning And Care
Crepe Maker R-2202 • Allow your appliance to pre-heat until the green ready light goes off. This indicates that the cooking plate has reached the correct temperature for cooking. • For best results, lightly spray the cooking plate with a cooking oil spray before using. - Page 7 Crepe Maker R-2202 • Never pour cold water on a hot plate, this could damage the device and can cause splashing hot water. • Clean the hotplate with hot water, washing-up liquid and a damp cloth or soft brush. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
- Page 8 Crepe Maker R-2202 At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Need help?
Do you have a question about the R-2202 and is the answer not in the manual?
Questions and answers