Resetting The Memory; Display Language Setting; Auto Power Off Function; Retrieving A Sentence From Memory - Casio KL-820 User Manual

Resetting the Memory

You should reset the memory of the Label Printer before using it for the first
time.
Important!
• Resetting Label Printer memory clears its memory of all input data.
To reset the memory
1. Make sure that Label Printer power is off.
2. While holding down the PRINT and SPACE keys, press ON/OFF to turn
power on.
• This prompt confirms whether or not you want to initialize the Label Printer.
I N I T I
3. Release the PRINT, SPACE, and ON/OFF keys.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation
without initializing anything.

Display Language Setting

You can select English, German, French, Italian, Spanish, or Swedish as the
language to be used for display messages. For information about how to change
the language setting, see page E-31.

Auto Power Off Function

If you do not perform any key operation for about six minutes, the Label Printer
automatically turns power off. To restore power, press ON/OFF.
E-10
A L I Z E ?
S E T / E S C

Retrieving a Sentence from Memory

If power is turned off or if Auto Power Off is triggered while you are creating a
sentence, the sentence that was being created is saved temporarily in printer
memory. The next time you turn on power, the message "[SET] TO RECALL" will
appear. Pressing SET will display the sentence currently stored in memory.
* A sentence being created with Layout Printing, Numbering and Bar Code cannot be restored.

Tape Cartridges

Use the procedures described below to load a tape cartridge into the Label
Printer.
Important!
• Never try to push the tape back into the cassette. Once tape is out of the
cassette, there is no way to wind it back in. Trying to do so can cause operational
problems with the Label Printer.
• The following are the tape widths that can be used with this printer: 6mm,
9mm, 12mm, 18mm, 24mm.
To load a tape cartridge
1. Make sure that the Label Printer is turned off.
2. Hook your finger under the center of the cassette cover and then lift up to
open the cover.
• Never touch the print head or other metal objects near the head. These items
become very hot, and touching them creates the risk of burn injury.