Delete File; Disk Error Messages - Yamaha PORTATONE PSR-6700 Manual

. DELETE FILE
ADELETE FILE Size: 32k
BG! MH_FILESS = MES.
CS) Gra eas |
@ Purpose:
Deletes the specified file from the disk.
Procedure:
Use the left [-] and [+] buttons to select the number of
the file to be deleted (00 — 99). The name of the selected
L) file will be displayed to the right of the number, and the
: size of the file in kilobytes (approximate) will be shown on
the upper display line.
When the file number has been specified, press the right
(:] and [+] buttons under "-YES-" on the display simulta-
neously to delete the file.
B Notes:
Files deleted from disk can not be restored (there is no
. "Undo" function), so be sure you' ve selected the right file
number before actually executing the delete operation.
[FORMAT DISK
Disk Page 6
AFORMAT CISE
Are you sure? - YES -
ae i EE
@ Purpose:
Formats a new floppy disk for use with the PSR-6700.
B Procedure:
After inserting a new floppy disk into the disk drive,
press the right [-] and [+] buttons under "-YES-" on the
display simultaneously to begin formatting. "Don't
remove disk" will appear while the disk is being format-
ted, and the number of remaining tracks to be formatted
will be shown on the upper display line.
Bi Notes:
The PSR-6700 uses only 3.5" 2DD type floppy disks.
Disk Page 5 |
[F11] DISK
@ DISK ERROR MESSAGES
If an error is encountered when a disk operation is
executed, one of the following error messages may ap-
pear:
"Type Error or Unformat!"
The disk in the drive has not been formatted for
use with the PSR-6700.
"Not Found File!"
The disk does not contain any files saved by the
user.
"Write Protect on !"
The disk write protect tab is in the write disable
position.
"Unformat Disk!"
The disk in the drive has not been formatted or the
disk is the wrong type or has the wrong format.
"Disk Error!"
Data error.
"Disk Full!"
The disk is full.
"Sample Data Disk!"
The supplied data disk is in the drive.
"Not Found Disk!"
No disk in drive.
"Bad File Name!"
The file name is all spaces.
Some of the error displays automatically revert to the
previous display after a few seconds, while others require
that the right [-] and [+] buttons under "-QUIT -" on the
display be pressed simultaneously to exit from the error
display.
If a damaged disk is used the data countdown during
FROM DISK or TO DISK operations may stop and the
load or save operation may get "hung up." In this case,
eject the disk from the drive even though the DISK IN
USE lamp may be on. Discard the damaged disk.
45