Installation Instructions; Installing The Refrigerator - GE GBC12IAXLSS Owner's Manual And Installation Instructions

Bottom freezer refrigerator
Hide thumbs Also See for GBC12IAXLSS:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLING THE REFRIGERATOR

REFRIGERATOR LOCATION
• Do not install the refrigerator where the temperature will
go below 60°F (16°C) because it will not run often enough
to maintain proper temperatures.
• Do not install the refrigerator where the temperature will
go above 100°F (37°C) because it will not perform properly.
• Install it on a floor strong enough to support it fully loaded.
CLEARANCES
Allow the following clearances for ease of installation, proper
air circulation and electrical connections.
Sides
2" (5.08 cm)
Top
2" (5.08 cm)
Back
2" (5.08 cm)
PLUG IN THE REFRIGERATOR
1
See the grounding information attached
to the power cord.
PUT THE REFRIGERATOR IN PLACE
2
Move the refrigerator to its final location.

Installation Instructions

9
LEVEL THE REFRIGERATOR
3
The leveling legs have 3 purposes:
1) The leveling legs adjust so the door closes
easily when opened about halfway. (The
front of the refrigerator should be 1/4"
[6 mm] higher than the rear of the
refrigerator.)
2) The leveling legs adjust so the refrigerator is
firmly positioned on the floor and does not
wobble.
3) The leveling legs serve as a stabilizing brake
to hold the refrigerator securely in position
during operation and cleaning.
Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
CAUTION:
personal injury or property damage,
the leveling legs must firmly touch
the floor.
INSTALL TOE KICK
4
Transfer the slide plate as needed.
A
B
Using a Phillips screwdriver, secure the toe kick
with the screws provided.
Slide Plate
Screw
SET THE CONTROLS
5
Set the controls to the recommended setting.
To avoid possible
Screw

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gbc12iaxrssGbc12iax

Table of Contents