Audio Adjustments; Graphic Equalizer; Volume; Super T-Bass System - Aiwa CX-NA303 Operating Instructions Manual

For nsx-a303 and nsx-a304
Table of Contents

Advertisement

Available languages

Available languages

T-BASS
l-r
\
I
—.r. —
B
SHIFT
T-BASS
VOLUME
Turn VOLUME on the main unit, or press VOLUME on the
remote control.
The volume
level is displayed
as a number from O to MAX (31).
The volume
level is automatically
set to 16 when the power is
turned off with the volume
level set to 17 or more.
The T-BASS
system
enhances
the realism
of low-frequency
sound.
Press T-BASS.
Each time it is pressed,
the level changes.
Select
one of the
three levels, or the off position to suit your preference.
To
select with the remote control
press T-BASS while pressing
SHIFT.
m
Low frequency
sound may be distorted
when the T-BASS system
is used for a disc or tape in which low frequency
sound is originally
emphasized.
In this case, cancel the T-BASS system.
Au
This unit provides the following three different equalization
curves.
ROCK:
Powerful sound emphasizing
treble and bass
POP: More presence
in the vocals and midrange
CLASSIC:
Enriched
sound with heavy bass and fine treble.
Press one of GRAPHIC EQUALIZER.
The selected
equalization
mode is displayed.
To
cancel the selected mode
Press the selected
button again. "GEQ OFF
is displayed.
To select with the remote control
Press
GEQ
repeatedly
while pressing
SHIFT. The GEQ mode is
displayed
cyclically
as follows.
r
ROCK—
POP —
CLASSIC—
GEQ OFF –
(cancel)
7
To dim the illumination
of the display
1
2
3
Press CLOCK/DIMMER
twice so that "DIMMER"
is displayed,
then press II SET within 4 seconds.
Press ++
or -
repeatedly
to select the dimmer
mode as
follows.
DIMMER
1 —
DIMMER
2—
DIM-OFF
(cancel)
Press II SET within 4 seconds.
DIMMER
1: The illumination
of the display
is dimmer
than
usual, and the spectrum
analyzer
lights off.
DIMMER
2: The illumination
of the display
is dimmer
than
DIMMER
1, and the illumination
on the buttons light off.
DIM-OFF:
The normal display is resumed.
Using the headphones
Connect headphones
to the PHONES jack with a standard stereo
plug (06.3 mm,
'/4
inch).
No sound is output from the speakers
while the headphones
are
plugged
in.
Sound adjustment
during recording
The output volume and tone of the speakers
or headphones
may
be freely varied without affecting
the recording.
ENGLISH
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nsx-a303Nsx-a304

Table of Contents