Safety and EMC Regulatory Statements
EMC Regulatory Statements
declares, that the product
Regulatory Model Number
conforms to the following Product Specifications and regulations:
EMC: Class A
EN 55022:1998 +A1:2001 +A2:2002
EN 55024:1998 +A1+A2
EN 61000-3-2:2000 +A2:2005
EN 61000-3-3:1995 +A1:2001
FCC CFR47 Part 15
EN 60950-1:2001 / IEC 60950-1:2001
EN 60825-1:1994 +A1+A2 / IEC 60825-1:1993 +A2 Class 1
The device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC,
the EMC Directive 2004/108/EC and carries the CE marking accordingly.
This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The
Regulatory Model Number is that main product identifier in the regulatory documentation and test reports, this
number should not be confused with the marketing name or the product numbers.
This product was tested with HP branded products only.
Roseville, 22 January 2008
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-
TRE, Herrenberger Straße 140, D-71034 Böblingen (FAX: + 49-7031-14-3143)
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN17050-1
8000 Foothills Blvd.
Roseville, CA 95747-5502
HP ProCurve Switch 5304xl, 5308xl, 5348xl (bundle)
5372xl (bundle), 5304xl-32G (bundle), 5308xl-48G (bundle)
J4850A, J4819A, J4849A/B, J4848A/B, J8166A, J8167A
J4852A, J4878A/B, J4858A/B/C, J4859A/B/C, J4860A/B/C,
J4839A, J8161A, J8168A, J4907A, J4820B, J4821B, J4878B,
J8162A, J8988A, J8169A, J8177B, J8988A, J9001A, J9003A