Download Print this page

HP J4850A Installation And Getting Started Manual Page 31

Procurve series 5300xl switches.
Hide thumbs

Advertisement

Insert the power supply into the
opening, then slide it all the way
in until it connects to the switch.
The power supply face plate will
be flush with the back face of the
switch.
Figure 2-3. Installing a power supply
Once the power supply is installed, ensure you tighten the four retaining
screws that hold it in place. The screws can be tightened with either a flat-
bladed or Torx T-10 screwdriver. Be careful not to overtighten the screws.
Figure 2-4. Tighting the power supply retaining screws
Installing the Switch 5300xl Series
Installation Procedures
tighten the
four screws
2-11

Advertisement

   Related Manuals for HP J4850A

Comments to this Manuals

Symbols: 0
Latest comments: