Cisco Catalyst WS-C2924-XL Hardware Installation Manual page 52

Preparing for Installation
•
•
•
In addition to these items, the Catalyst 2924M XL DC switch also ships with a
Note
DC terminal block plug on the switch back panel. (See
Catalyst 2900 Series XL Hardware Installation Guide
2-8
Mounting kit containing these items:
– Four rubber feet for mounting the switch on a table, shelf, or desk
Two mounting brackets
–
Four number-12 Phillips machine screws for attaching the brackets to a
–
rack
Four number-8 Phillips flat-head screws for attaching the brackets to the
–
switch (19-inch rack mount)
Four number-8 Phillips truss-head screws for attaching the brackets to
–
the switch (24-inch rack mount)
One cable guide and one (two for modular switches) black Phillips
–
machine screw for attaching the cable guide to one of the mounting
brackets
The cable guide does not attach to the Catalyst 2912 LRE XL and
Note
2924 LRE XL switches.
One RJ-45-to-DB-9 adapter
Cisco Information Packet, containing warranty, safety, and support
information
Chapter 2 Installation
Figure 1-13.)
78-6461-04