Table of Contents
Advertisement
PLAYBACK
To set the slideshow interval
1.
Use [ ] and [ ] to select "Interval".
2.
Use [ ] and [ ] to specify the interval setting
you want, and then press [SET].
• You can specify "MAX", or a value in the range of 1
to 30 seconds as the interval.
• When "MAX" is selected for the interval, only the first
frame of movie files is played.
3.
Use [ ] and [ ] to select "Start", and then
press [SET].
• This starts the slideshow.
Using the Photo Stand Feature
The "Photo Stand" feature lets you specify what should
appear on the camera's monitor screen while the camera is
on its USB cradle. You can play a Phot Stand slideshow
without worrying about remaining battery power, or you can
specify display of a particular image. Photo Stand feature
operations are performed in accordance with slideshow
setting. See page 87 for information about configuring
slideshow settings to suit your needs.
1.
After making sure the camera is turned off,
place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.
2.
Press the USB cradle's
[PHOTO] button.
• This starts the Photo
Stand slideshow with the
images or image you
specified under "To
specify the slideshow
images" (page 88).
90
[PHOTO]
Advertisement
Table of Contents
