Advertisement
Operation Guide DQD110/120B
USING THE CLOCK 2
Setting the Time and Date Manually
• When using the clock in an area that is outside of the range of the transmitter or in an area where signal
reception is impossible for some reason, you need to manually adjust the time setting as required.
1. Press the SET button (6) to cycle through the setting screens as shown below.
Current Time Screen
GMT Differential Setting Screen
Year Setting Screen
Month and Day Setting Screen
Time Setting Screen
2. While the screen you want is on the display, use the Alarm Time Set buttons (3) to change the digits that are
flashing.
Press
to increase the flashing digits.
<
>
<
DQD-110B
DQD-120B
Press
to decrease the flashing digits.
Temperature Unit Selection Screen
Contrast Adjustment Screen
12-hour/24hour Setting Screen
Press
to increase the flashing digits.
>
Press
to decrease the flashing digits.
• Holding down
or
changes the flashing digits at
GMT differential
high speed.
• Your GMT differential is a value that indicates the time
difference between your current location and Greenwich
Mean Time (GMT). You can find out the GMT differential
of your location by checking the nearby map.
• You can set the year in the range of 2000 to 2099.
The day of the week is set automatically in accordance
with the date setting.
• Pressing
or
while the Time Setting Screen is on
the display causes the seconds count to be reset to 00.
• Each press of
or
while the 12-hour/24-hour Setting
Screen is on the display toggles between
12-hour and 24-hour timekeeping.
• You can select one of 16 levels for the contrast setting.
Select the setting that makes the display easy to read.
• While the Temperature Unit Selection Screen is on the
display, press the
or
button to toggle between
°C (Celsius) and °F (Fahrenheit).
3. After making the settings you want, use the SET button (6) to display the Current Time Screen.
• The clock automatically returns to the Current Time Screen if you leave a setting screen on the display for about
three minutes without performing any operation.
USING THE ALARM 1
The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (4) to
select the snooze alarm feature.
Setting the Alarm Time
Use the Alarm Time Set buttons (3) to set the alarm time.
Pressing the Alarm Time Set buttons (3) causes the alarm time to appear in place of the date on the display.
Press to increase the alarm time setting.
<
>
<
DQD-110B
ALARM SET
MAX/MIN
ALARM SET
MAX/MIN
Press to decrease the alarm time setting.
• Holding down
or
changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Mode selector (4) on the side of the clock to turn the alarm on and off, and to select the snooze feature.
Alarm Mode selector
The alarm sounds at the preset time for one minute, and seven more times every five
SNOOZE
minutes thereafter. Even if you stop the alarm sound by pressing the SNOOZE/LIGHT
button ( ), the alarm operation is performed again five minutes later.
• The indicator ( ) flashes on the display to indicate that the snooze feature is
activated.
ON
The alarm sounds at the preset time for one minute.
OFF
The alarm does not sound.
• The alarm time appears in place of the date on the display whenever the Alarm Mode selector (4) is set to ON
or SNOOZE.
• The alarm sound changes over four levels as it sounds.
: 0H
: 1H
: 2H
: 3H
Press to increase the alarm time setting.
>
DQD-120B
Press to decrease the alarm time setting.
Description
3
Advertisement
