Getting To Know Your Cash Register; Mode Switch - Casio 130CR User Manual

Getting to know your cash register

Getting to know your cash register
OFF
Note:
An error is generated
(E01 displayed)
whenever the position
of the Mode Switch is
changed during
registration.
Display
12#45&78
!
#
@
!
Department Number Display
Anytime you press a department key to register a unit price,
the corresponding department number appears here.
@
PLU Number Display
Anytime you perform a PLU registration, the corresponding
PLU number appears here.
E
6
The position of the Mode Switch controls the type of operations you can perform on the cash
register.
PGM RF
OFF
In this position, the power of the cash register is off.
REG (Register)
This is the position used for registration of normal transactions.
RF (Refund)
This is the position used for registration of refunds.
CAL (Calculator)
This is the position used for calculator mode.
PGM (Programming)
This is the position used to program the cash register to suit the needs of your store.
X (Read)
This is the position used to produce reports of daily sales totals without clearing the totals.
Z (Reset)
This is the position used to produce reports of daily sales totals. This setting clears the totals.
$
OFF REG CAL X Z
#
Number of Repeat Display
Anytime you perform "repeat registration" (page 13), the
number of repeats appears here.
Note that only one digit is displayed for the number of
repeats.
$
Numeric Display
Entered values (unit prices or quantities) and calculated
values (subtotals, totals or change amount due) are dis-
played here. The capacity of the display is 8 digits.
This part of the display can be used to show the current time
or date between registrations (page 32).