Epson Stylus Photo RX600 Quick Start Manual page 17

Printing a Photo from Film or a Slide
You can print a 4 × 6-inch photo from a 35 mm film negative or a
slide. (For additional details on film printing, see your User's Guide.)
Before you start, make sure the cable is connected to the
(transparency unit) connector. (If it is not connected, turn off the
RX600, connect the cable, then turn the RX600 back on.)
Loading Paper
1 Press the P
2 Open the output tray.
button to turn on the RX600.
On
Output tray
15
TPU