Site Preparation - Electrolux E24WC48EPS Installation Manual

Site Preparation

CABINET
OR WALL
DOOR
SWING
0"
CLEARANCE
NEEDED
Figure 1
2 - 3/4"
Figure 2
INTAKE
Figure 3
NO NO TE TE
NOTE NO NO TE TE
All units require zero clearance when installed flush with a
cabinet or wall (see Figure 1). Electrolux stainless steel
models require a minimum 2-3/4 inch handle clearance
when installed against a wall or cabinet that extends
beyond the front edge of the unit (see Figure 2).
5
UL124A
6
7
8
EXHAUST
Position the unit to allow free air flow
through the front grille (see Figure 3).
Wipe out inside of unit with a damp cloth.
Final finish of the wooden wine rack trim
must be applied at least 24 hours before re-
installing the wooden rack trim into the
cabinet.
Be sure to install the Anti-Tip brackets.
Follow the instructions provided with the
Anti-Tip bracket kit.