Tape Operation - JVC KS-RT70 B Service Manual

<S — RT70 B/E/G/GE/GI
i Tape operation
Operate In the order shown.
6 (No.49178)
@ OFF-voL
@ Doiby B NR button
Set the Dolby B NR (00) button as required
after the MODE button has been pressed
and its red indicator is lit.
ON ~- DU indicator lights.
OFF — OO indicator goes out.
IGNITION KEY-OFF RELEASE
(KEY-ON PLAY) MECHANISM
When the ignition key is turned off, this "key-off
release" mechanism will automatically release
the tape from the magnetic head. This will set
the mechanism to the standby mode. When the
key is turned on, it will automatically return to
the playback mode.
Select program.
TO FAST FORWARD AND REWIND
THE TAPE -
Press the FF button to fast forward the side
being played back; when the end of the tape is
detected, the tape is reversed and played back
from the beginning of the other side. Press the
REW buiton to rewind the tape. When the tape
is rewound to the beginning, it is played back
again. Lightly press the other PROG button to
start play from the current position during the
fast forward or rewind mode.
AUTO-REVERSE MECHANISM
When the tape reaches the end of one side, this
mechanism automatically switches over to play
back the other side. To listen to the other side
while playing one side, press the PROG
buttons. The change in the tape transport
direction can' be checked from the Tape
Direction indicators.