Playing Compact Discs - JVC KS-RT70 B Service Manual

'S — RT70 B/E/G/GE/GI
li CD Automatic Changer Operation
PRECAUTIONS
e This unit is for the control of JVC
Compact Disc Automatic Changers
which must be purchased separately
(applicable models; XL-MKS500/
MG700RF/MG1800).
e For use, refer to the instructions of the CD
automatic changer.
e When a cassette tape is loaded while listen-
ing to a CD, CD playback is automatically
switched to cassette playback.
When there is no disc in the disc magazine of
the CD automatic changer or when the disc is
inserted into the tray upside down, the "- ——"
will be shown in the KS-RT70 display. In such
a case, remove the disc magazine from the
CD changer and set the discs correctly.
® When "CG Ei — © E7* is shown in the display
of the KS-RT70, press the RESET button of
the CD changer. When "(> E8" is shown,
confirm that the connections have been
made securely.
* The "©" shows the number of the CD
changers connected to the KS-RT70.
Example: When 6 XL-MG1800 changers are
connected.
4 2 3
XL-MG1800 +] XL-MG1800
§ 4
("5E1" means that the 5th CD changer is the
cause of the trouble.)
PLAYING COMPACT DISCS
To play all tunes
Operate In the order shown.
@ FuNc
Sat to the CD mode.
@ OFF - VOL
Adjust.
Track (tune) number
wires
Olse number Magazine number
e After the last tune of the first disc has
been played, the disc on the next tray
automatically starts from its beginning. lf
there is no disc on the tray, the display
shows the "— — -—" and the following disc is
played.
MAGAZINE SELECTION
e Magazine select button
Press the magazine select button (+M/-M)
after the MODE button has been pressed
and its red indicator is lit to select the
required magazine.
(Example: to select the 3rd magazine with
the XL-MG1800 changer connected.)
0 (No.49178)
®@ When selecting the 10th or higher magazine
with four or more XL-MG1800 changers
connected, the unit's digit of the magazine
number blinks.
For exampie, when the 18th magazine is
being selected, the "8" blinks.