Removing The Fan Assembly - Cisco 7609-S Installation Manual

Chapter 5 Removal and Replacement Procedures

Removing the Fan Assembly

Step 1
OL-5079-04
The fan assembly is designed to be removed and replaced while the system is
operating without presenting an electrical hazard or damage to the system.
Perform these steps to remove the existing fan assembly:
Locate the fan assembly located above the card cage. (See
Figure 5-7 Fan Assembly
FAN
STATUS
Captive installation
screw
Removing and Replacing the Fan Assembly
Captive installation
screw
o
o
INPUT
FAN OUTPUT
OK
OK FAIL
Cisco 7609 Internet Router Installation Guide
Figure 5-7.)
INPUT FAN
OUTPUT
OK
OK FAIL
5-13