Setting Up the Chassis
Figure 3-14 Bracket Installation—Center Mounting with Front Panel Forward
Figure 3-15 Bracket Installation—Center Mounting with Rear Panel Forward
Installing the Router in a Rack
After the brackets are secured to the chassis, you can mount the chassis in a rack. Use the illustrations
in the previous section as a guide to attaching the brackets to the rack.
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
•
•
•
Cisco 2600 Series Routers Hardware Installation Guide
3-10
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
the rack.
Statement 1006
Chapter 3
Installing the Router
OL-2171-06