Make Selections; Select A Drying Temperature A.na; Start The Dryer Niini; To Stop And Restart The Dryer - Kitchenaid Kgye660W Use And Care Manual

Make Selections
AWARNING
To reduce the risk of fire,
electric shock or injury to
persons, read the Important
Safety Instructions on page 3
before operating your dryer.
Select a Cycle
To set the desired cycle, turn the
Cycle Contro! Selector either left or
right. Stop turning when the
marker points to the cycle and
setting of your choice. Refer to the
Cycle Selection Chart on page 12
for recommended cycle and
temperature settings.
A description of each cycle can
be found on pages 9-10.
Select a Drying
Temperature
The Temperature Selector can be set
at any of three temperatures: LOW,
MEDIUM and HIGH. Refer to the
Cycle Selection Chart on page 12
for the recommended temperature
settings.
Start button
TEMPERATURE SELECTIONS
Start the Dryer
To start the dryer, close the door,
select a cycle and drying
temperature, then push START. The
dryer will start tumbling when the
START button is pushed.
To stop the dryer, open the door
or turn the Cycle Control Selector to
the OFF position.
To Stop and Restart the
Dryer
e Open the door or turn the Cycle
Control Selector to OFF to stop the
dryer.
e Close the door, select a cycle (if
necessary) and push the START
button to restart the dryer.
The Cycle Control Selector should
point to an OFF area when the
dryer is not in use. If the dryer is
stopped before the cycle is finished,
turn the Cycle Control Selector to
an OFF area.
End of Cycle Signal
Your dryer will sound a signal to let
you know when the cycle you have
selected is finished. The signal
cannot be adjusted or turned off.
The signal is helpful when drying
permanent press, synthetics, and
other items that should be taken
out as soon as the dryer stops
tumbling.
MEO-UM
Temperature selector