Cisco 1603R User Manual page 14

Router Memory
Identifying the Memory Architecture from Cisco IOS
Use the Cisco IOS show version command to display some memory architecture
information for your router (show in boldface in the example output):
•
Amount of onboard DRAM (a type of RAM)
•
Whether the Cisco IOS software is running from RAM or Flash memory
•
Amount of Flash memory
Router# show version
Cisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-BNSY-M), EARLY DEPLOYMENT RELEASE SOFTWARE
11.2(9)P
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 11-Aug-97 14:10 by cisco
Image text-base: 0x02005000, data-base: 0x02477BD0
ROM: System Bootstrap, Version 11.1(12)AA,DEPLOYMENT RELEASE SOFTWARE
(f)
ROM: 1600 Software (C1600-RBOOT-R), Version 11.1(12)AA, EARLY DEPLOYMENT
RELEASE
Router uptime is 12 minutes
System restarted by power-on
System image file is "flash:c1600-bnsy-mz", booted via flash
cisco 1605 (68360) processor (revision C) with 7680K/512K bytes of
memory.
Processor board ID 06027889, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
2 Ethernet/IEEE 802.3 interface(s)
System/IO memory with parity disabled
8192K bytes of DRAM onboard
System running from RAM
8K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read/Write)
Configuration register is 0x2102
1-10 Cisco 1600 Series Router Hardware Installation Guide