Charging The Battery - Silvercrest 100363466 Quick Start Manual

˜ Charging the battery
B
1. Connect the USB Type A plug
power adaptor (not included).
2. Connect the charging adaptor
product. The charging adaptor is held in place magnetically.
3. The start of the charging process is shown on the display
4. When the battery is fully charged: Disconnect the charging adaptor
product and the USB Type A plug
NOTES:
The charging adaptor
Make sure that the charging pins
contacts .
5 ] [
The product turns on automatically as soon as it is connected with the USB port.
The product cannot be operated during charging.
The charging status is shown on the display
A charging cycle (charging current: approx. 120 mA) takes approx. 2 hours.
26 GB/IE
to a free USB port on your computer or to a USB
8 ] [
to the charging contacts
[ ]
from the USB port.
8 ] [
can only be used in the position shown in figure B.
[ ]
correctly engage with the charging
9 ] [
[ ]
on the back of the
5 ] [
.
2 ] [
.
2 ] [
[ 8 ]
from the
[ ]