Installation; Electric Shock Hazard; Energy Saving Tips - Silhouette DPAC120061 Owner's Manual

Energy-Saving Tips
Your Danby appliance is designed to be highly
efficient in energy savings. Follow these
recommendations for greater efficiency.
1) Select a thermostat setting that suits your
comfort needs and leave at that chosen setting.
2) The air filter is very efficient in removing airborne
particles. Keep the air filter clean at all times.
3) Use drapes, curtains or shades to keep direct
sunlight from penetrating and heating room, but
do not allow drapes or curtains to obstruct the air
flow around the unit.

Installation

Installation Accessories Fig. 1

Electric Shock Hazard

To avoid the possibility of personal injury,
disconnect power to the unit before installing or
servicing.
CAUTION
To avoid installation/operation difficulties,
read these instructions thoroughly.
LOCATION: Use this portable air conditioner on a
level surface only as inclinations greater than 3° can
cause water overflow.
Description
Flexible exhaust hose with collars & adapters ...........2/set
stretches from 17- 1 /2" (44.5 cm) up to 55-1/2" (141 cm)
Adjustable window/patio door slider kit .....................4/set
from 28" (71.1 cm) up to 80" (203 cm)
Rain Hood (For slider kit) ..............................................1 kit
see pg #7 for assembly instructions
1.8m (70 14/16") Drain Hose (Not Shown)......................1 pc
Air Intake Filter Basket (Not Shown).............................1 pc
SPECIAL NOTE: The exhaust/window kit must be
installed at all times when the unit is operating
under AIR CONDITIONING mode.
Quantity
WARNING
When the patio door kit is installed, it will not be
possible to lock the patio door.
THIS COULD POSE A SECURITY RISK!
Installation of a "FOOTBOLT" or "DROP BAR"
behind the door is suggested. (Available through
most local hardware stores)
4) Start your air conditioner before the outdoor air
becomes hot and uncomfortable. This avoids an
initial period of discomfort while the unit is
cooling off the room. Use of the automatic
start/stop programmable TIMER feature can be
a major asset in this regard if utilized to the
fullest extent.
5) When outdoor temperatures are cool enough,
turn the air conditioner off and use the FAN
MODE on HIGH, MED or LOW. This circulates
indoor air, providing some cooling comfort and
utilizes less electricity.
There should be at least 11.8" (30 cm) clearance
between the unit and any other objects or building
structure and should be installed on a level surface.
The unit does not have to be vented outside during
Dehumidifying/Fan mode operation, but it is
recommended that the hoses remain installed (on unit)
during Dehumidification.
Fig. 1 Installation Accessories
Rain Hood (1)
Flexible Exhaust Hose (2)
17-1/2" - 55-1/2"
Hose Collar
Adjustable Window/Patio Door Slider Kit
28" - 80"
4
Rain Hood Inserts (2)
Window Exhaust
Adapter (2)