Installation; Window Kit Installation - Danby Premiere DPAC 11010 Owner's Use And Care Manual

Danby products portable air conditioner owner's use and care guide
Table of Contents

Advertisement

Available languages

Available languages

ELECTRIC SHOCK HAZARD: To avoid
WARNING
the possibility of personal injury, disconnect
power to the unit before installing or servicing.
INSTALLATION ACCESSORIES (FIG. 1)
Flexible Exhaust Hose (13cm) & Exhaust nozzle
connector (2 pcs)... from 17
Adjustable window door slider kit (3 pcs)..... from 28
1
/
"(72cm) up to 80" (203cm)
3
Fixture..... (2 pcs)
Screws...(8 pcs)
NOTE: The exhaust/window kit must be installed at all
times when the unit is operating under AIR
CONDITIONING mode.
IMPORTANT
There should be at least 11.8" (30cm) clearance between the unit and any other objects or building structures,
and should be installed on a level surface. The unit does not have to be vented outside during Dehumidifying
or Fan Only mode operation.
INSTRUCTIONS FOR ASSEMBLING THE WINDOW
ADAPTER KIT (FIG. 2).
a) Insert tube adapters through the back of the window panel.
b) Secure each tube adapter with four screws through the
front of the window panel.
c) Insert window panel extensions into the window panel.
Lightly tighten the screws in the window panel to hold the
extensions in place.
WINDOW KIT

INSTALLATION

1) Select a suitable location, making sure you
have access to an electrical outlet.
2) Install the flexible hose to the rear side of the
unit. Insert the hose collar on top of the exhaust
opening and twist to lock into position.
3) Install the adjustable Window Slider Kit as
required (see Fig. 3a & 3b).
4) Install the opposite end of the flexible exhaust
hose into the window exhaust adapter.
5) Install the window exhaust adapter into the
opening in the slider section, making sure the
window slider sections are secure.
6) Plug the unit into a 115V/60Hz grounded
electrical outlet.
INSTALLATION
7
/
(45cm) up to 53
10
Your window kit has been designed to fit most standard "vertical"/"horizontal" windows up to
a maximum height of 80" (203cm).For vertical window applications, multi lock positions are
provided on the edge of each slider section to secure each sliding section together.
Fig. 1
Exhaust Nozzle
Connector
1
/
"(135cm)
6
Screws
Fig. 2
Tube Adapters
HORIZONTAL
Fig. 3a
Window Slider Kit:
Min.: 26
5
/
" (67.5cm)
8
Max.: 80" (203cm)
5
INSTALLATION ACCESSORIES
Flexible Exhaust Hose
Adjustable Window Slider Kit:
28 1/3" (72cm)- 80" (203cm)
Back of
Window Panel
Fig. 3b
VERTICAL
Window Slider Kit:
Min.: 26
Max.: 80" (203cm)
Fixture
5
/
" (67.5cm)
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents