Download Print this page
kozy heat OCK-S155A Manual
kozy heat OCK-S155A Manual

kozy heat OCK-S155A Manual

Propane conversion kit

Advertisement

Available languages

Available languages

Quick Links

#OCK-S155A
PROPANE CONVERSION KIT
For model #SP-41-MV
Direct Vent Gas Fireplace
This fireplace is certified under U.S. and Canadian standards ANSI Z21.88-2017/CSA 2.33-2017, CSA 2.17-2017
IMPORTANT
THE CONVERSION SHALL BE CARRIED OUT BY A
MANUFACTURER'S AUTHORIZED REPRESENTATIVE,
IN ACCORDANCE WITH THE REQUIREMENTS
OF
THE
MANUFACTURER,
TERRITORIAL AUTHORITIES HAVING JURISDICTION
AND IN ACCORDANCE WITH THE REQUIREMENTS
OF THE CAN/CGA-B149.1 OR CAN/CGA-B149.2
INSTALLATION CODES.
CETTE CONVERSION DE GAZ DOIT ÊTRE EFFECTUÉE
PAR UN REPRÉSENTANT AUTORISÉ DU FABRICANT,
CONFORMÉMENT AUX EXIGENCES DU FABRICANT ET
DES AUTORITÉS PROVINCIALES OU TERRITORIALES
AYANT JURIDICTION, ET AUX EXIGENCES DES
CODES D'INSTALLATION CAN/CGA-B149.1 OU CAN/
CGA-B149.2.
WARNING
This conversion kit shall be installed by
a qualified service agency in accordance
with the manufacturer's instructions and
all applicable codes and requirements
of the authority having jurisdiction. If
the information in these instructions is
not followed exactly, a fire, explosion
or productions of carbon monoxide
may result, causing property damage,
personal injury, or loss of life. The
qualified service agency is responsible
for proper installation of this kit. The
installation is not proper and complete
until
operation
appliance is checked as specified in the
manufacturer's instructions supplied
with the kit. Refer to appliance owner's
manual or product data plate for proper
inlet and manifold pressure adjustments
and orifice sizing.
Hussong Manufacturing Co., Inc.
204 Industrial Park Drive, PO Box 577
Lakefield, MN 56150-0577, USA
PROVINCIAL
OR
of
the
converted
HUSSONG MANUFACTURING CO., INC.
READ ALL STEPS BEFORE STARTING INSTALLATION.
LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE.
This gas conversion kit installation instructions must be used in
conjunction with the installation and operation manual provided with
the appliance. Please read the appliance owner's manual completely
before performing any procedures in these instructions. All warnings,
precautions, and instructions outlined in the manual provided with the
appliance will continue to apply to these instructions.
AVERTISSEMENT
Ce kit de conversion doit être installé
par une agence d'entretien qualifiée,
selon les instructions du fabricant et
tous codes et règlements applicables
de l'autorité ayant juridiction. Le non-
respect de ces instructions peut créer un
incendie, une explosion ou la production
de monoxyde de carbone, et causer des
dommages matériels, des blessures
ou même la mort. L'agence d'entretien
qualifiée est responsable de la qualité
d'installation de ce kit. L'installation
ne sera conforme et complète qu'après
avoir vérifié le fonctionnement du
foyer converti, tel que spécifié dans les
instructions du propriétaire fournies
avec ce kit. Voir le manuel d'utilisation
ou la plaque signalétique de l'appareil,
pour les réglages de pressions d'entrée
et du manifold et les dimensions d'orifice
(injecteur) de brûleur/veilleuse.
EN
FR
PG
6
SP-41-MV • Rev. 1, 2/22
Report Number: 19-561
Starting Serial Number:
22 95000 11

Advertisement

loading
Need help?

Need help?

Do you have a question about the OCK-S155A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for kozy heat OCK-S155A

  • Page 1 #OCK-S155A PROPANE CONVERSION KIT For model #SP-41-MV HUSSONG MANUFACTURING CO., INC. Direct Vent Gas Fireplace This fireplace is certified under U.S. and Canadian standards ANSI Z21.88-2017/CSA 2.33-2017, CSA 2.17-2017 IMPORTANT THE CONVERSION SHALL BE CARRIED OUT BY A MANUFACTURER’S AUTHORIZED REPRESENTATIVE,...
  • Page 3: Prepare The Fireplace

    The size are stamped on the orifices. Table 1, Burner Orifice Size at Elevations 0-4,500’ (1,372m) Fuel Orifice Size Propane 1.55mm (DMS) FIGURE 2, Converted Pilot and Pilot Injectors Burner ori ce FIGURE 1, Burner Orifice #OCK-S155A HUSSONG MFG. CO., INC. KOZY HEAT FIREPLACES...
  • Page 4 Step 7: Turn the gas control knob to OFF. Step 8: Disconnect hose and tighten the inlet (IN) pressure tap by turning screw clockwise. Screw should be snug. Do not over tighten. #OCK-S155A HUSSONG MFG. CO., INC. KOZY HEAT FIREPLACES...
  • Page 5: Verify Operation

    Fuel Minimum Input Maximum Input Propane 21,000 Btu/h (6.2 kW) 28,000 Btu/h (8.2 kW) SIT millivolt correct pilot ame appearance Burner Ports FIGURE 5, Burner Ports Location and Correct Pilot Flame Appearance #OCK-S155A HUSSONG MFG. CO., INC. KOZY HEAT FIREPLACES...
  • Page 6 Tableau 1, Taille de orifice du brûleur aux altitudes 0-4500 pi (1372 m) Combustible Taille de l’orifice Propane 1,55mm (DMS) FIGURE 2, Veilleuse convertie et orifices de la veilleuse Ori ce du brûleur FIGURE 1, L’orifice du brûleur OCK-S155A HUSSONG MFG. CO., INC. KOZY HEAT FIREPLACES...
  • Page 7 Étape 6: Tourner le bouton de réglage de gaz à «OFF». Étape 7: Débrancher le tube (manomètre) et serrer (sens horaire) la vis du raccord de pression d’entrée (IN). Serrer la vis juste assez; pas trop! OCK-S155A HUSSONG MFG. CO., INC. KOZY HEAT FIREPLACES...
  • Page 8 Puissance maximum Propane 21 000 Btu/h (6,2 kW) 28 000 Btu/h (8,2 kW) Flammes de la veilleuse Trous perforés du brûleur FIGURE 5, Flammes de veilleuse dirigées vers les trous perforés du brûleur OCK-S155A HUSSONG MFG. CO., INC. KOZY HEAT FIREPLACES...