Wireless; Wireless Basic - TRENDnet TEW-637AP Manual

Wireless

The wireless section is used to configure the wireless settings for your Access Point. Note that changes
made in this section may also need to be duplicated on wireless clients that you want to connect to your
wireless network.
To protect your privacy, use the wireless security mode to configure the wireless security features.
The Wireless tab provides the following configuration options: Basic, Advanced, MAC Filter, Security,
WPS and Station List.

WIRELESS BASIC

Repeater Mode Support
Repeater Mode Support allows you to "repeat" a wireless signal from an existing access point.
Select the radio button to enable or disable. When enabled you have the option of defining the specific
access point to repeat off of by entering in the remote access points or wireless router's wireless MAC
address into the "AP MAC Addr. (Optional)" field. You must also configure the TEW-637AP with the
same SSID, channel and wireless encryption settings of the remote access point.
Page 20