Previous/Next Track - Philips Dcc 900 Instructions For Use Manual

PLAYBACK
PLAYBACK
e Close the tray. The display shows £
e Press the STOP @ key to stop playback. :
| In case this information is not (yet) known by the player, the track number will be indicated by |
~ appears on the display
2).
REPLAY
PREVIOUS/NEXT TRACK
TITLE SEARCH
Compared to CD, DCC has a new feature: the track title of a pre-
recorded DCC will be displayed during playback. It is also possible
to search for a track based on its title. When you press NEXT Pi
while the deck is in the stop mode the title of the next track
appears on the display. Searching for the track does not start yet.
You can actually wind to the track by pressing the PLAY ® key.
The messag appears on the display during the
time that your DCC 900 is retrieving the track titles from the
cassette.
SEARCHING FOR A PASSAGE
¢ Searching for a passage during playback can be done with
the BACKWARD <4 and FORWARD >> keys.
Hold FORWARD »» pressed down to search in the tape
travel direction. Hold BACKWARD << pressed down to search
in the opposite direction in which the tape is travelling.
Playback will continue as soon as you release the key.
¢ When you press the FORWARD >» or BACKWARD <€ keys
while the deck is in the stop mode, the winding will continue
until you press another key of the playback controls 17.
REVERSING THE PLAYING DIRECTION
e The SIDE A/B key is used to reverse the directionin which
the tape is travelling.
This selected side is indicated on the display as <[B] or
[A
When you press this key during playback, the playing direc-
tion will be reversed and playback will be continued at the
other side of the tape.
REPEAT
e You can use the REPEAT key 6 to repeat a particuar track or
the total number of tracks on the tape.
e Press this key once to repeat the current track.
The indication REPEAT TRACK will appear on the disilay.
Repeating the current track is not possible when jou are
using conventional analogue cassettes.
e Press this key once again if you wish to repeat all racks on
the tape. The display will show CONT REPEAT.
¢ Press this key another time to switch repeat off atair.
NOTE: When analogue cassettes are used, only thefurnction
CONT REPEAT can be activated. REPEAT TRACK does now ork
DOLBY NOISE REDUCTION
The Dolby Noise Reduction function will only be actie when
you are using conventional analogue cassettes.
Use the Dolby selector knob 3 to switch the Dalby IR system
on and off and to select Dolby B and Dolby C.