General Information; Maintenance - Philips Dcc 900 Instructions For Use Manual

SYSTEM ASPECTS
GENERAL INFORMATION
TIMER
By connecting your DCC deck to a timer, you can start and
stop playback or recording automatically.
e |f the tuner in your HiFi system (of the Philips 900 series) is
equipped with a timer (e.g. FT 930), make sure that the
correct ES! BUS connections are made.
e Set the timer and switch on the DCC deck.
¢ Prepare the deck for playback or recording (see under
chapter PLAYBACK or RECORDING).
¢ When you are using the timer, set the TIMER control to the
OFF position.
SYSTEM REMOTE CONTROL
The following DCC functions can be operated via your Philips
(900 series) system remote control (provided the correct ESI
BUS connections are made}:
— 0-9 digit keys - for selecting track numbers;
— PRESET/TRACK - next or previous track;
— PLAY - for starting playback;
— STOP - for stopping recording/playback;
— ««- for rewinding the tape;
— p> - for winding the tape;
— MODE - for selecting the tape travel direction;
— STANDBY - for selecting standby mode
GENERAL REMARKS
¢ The DCC 900 might influence the quality of a broadcast
signal when the radio antenna is located close to the DCC
player.
MAINTENANCE
* Do not leave the unit for any length of time in direct sunlight
or other places where high temperatures can occur, such as
in the vicinity of heating apparatus.
* Do not expose the equipment to humidity or rain.
¢ A chamois leather cloth slightly moistened with water is
sufficient for cleaning the deck.
© Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives.
| WARNING |
ONLY USE SPECIAL DCC CLEANING CASSETTES |
FOR YOUR DCC 900 !
DO NOT USE DEMAGNITIZE CASSETTES !
TECHNICAL SPECIFICATIONS
FREQUENCY RESPONSE
DIGITAL DCC prerecorded: 20 Hz - 20 kHz + 0.2 dB
(fs = 44.1 kHz)
Sample frequencies: 32 kHz, 44.1 kHz, 48 kHz dig. in
44.1 kHz analog input
S/N ratio: playback = 92 dB
| overall 2 92 dB
Dynamic Range: playback = 95 dB
overall 2 92 dB
playback < 0.003%
overall < 0.005%
playback 2 95 dB
overall > 85 dB
Quartz Crystal Precision
THD:
Channel! separation:
| Wow and Flutter:
ANALOG CASSETTE: playback only
Frequency response:
S/N ratio: 2 50 dB CrOz
Dolby B/C: Improvement B 10 dB
j Improvement C 20 dB
Wow and Flutter: 0.15 CCIR WTD
signal also supplied to digital outputs
30 - 16 kHz CrOz
INPUTS
Analogue line input: unbalanced
impedance > 20 kOhm |
Digital Coaxial: 0.5V/75 Ohm
Digital Optical: acc. to IEC 958tos link |
OUTPUTS
Analogue fixed: 2V
Analogue variable: motorised
Digital Coaxial: 0.5V/15 Ohm |
Digital Optical: acc. to IEC 958tos link |
HEADPHONE AMPLIFIER PERFORMANCE
Load Impedance Range: 8-60 Ohm |
Frequency range: 20-20 kHz, +0.5 dB |
Signal to Noise Ratio —- Playback: 90 dB
THD (including noise): B0 cB |
MISCELLANEOUS
Display: 16 segment leve meter
2scales
Remote Control: tS | bus
Mechanism 2 motor meal deck
Tape-speed level: 4.76 crrv/sec
Trayloader system
CABINET GENERAL
435 x 14) < 300
9kg
Dimensions (wxhxd):
Weight:
English