General Operation - Dual XHD6425 Installation & Owner's Manual

XHD6425 OPERATION
General Operation
Faceplate Removal
Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Semi-Permanent Remove trim ring and install supplied #1 x 7/" Phillips
Faceplate Installation head screw through left side of mounting frame into faceplate.
Power On/Off Press POWER or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press POWER to turn the unit off.
Mode
Press MODE to select between AM/FM, CD player, USB,
auxiliary input and Bluetooth (optional). Modes of operation
are indicated in the display.
NOTE: CD and Bluetooth modes will not appear unless a CD
is inserted or BTM60 (Bluetooth module - sold separately) is
attached.
Auxiliary Input
Insert .5 mm plug to connect your portable audio device.
Volume Adjust volume using rotary encoder (00-46).
Programmable Press and hold POWER for  seconds to program currently
Turn-On Volume
selected volume level. "P-VOL" and the current volume level
will momentarily appear in the display.
Mute
Press MUTE to silence the audio. "MUTE" will flash in the
display. Press MUTE again to cancel.
Preset EQ Curves
Press EQ to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Reset
Press to RESET the unit upon initial installation or if
abnormal operation occurs. The reset button is located
behind the faceplate.
Press DISP to select between clock and different types
Display
of information, such as radio frequency, HD Radio song
information, CD track/elapsed time, or MP/WMA/USB song
information.
6