Blade Descriptions; Unpacking Your Saw; Specifications - DeWalt DW716 Instruction Manual

Clamp: DW7082
Used for firmly clamping workpiece to the saw table for precision cutting.
Dust Bag: DW7053 (Included with some models)
Equipped with a zipper for easy emptying, the dust bag will capture the majority
of the sawdust produced (not shown).
NOTE: Deflector on dust spout channels debris to ground. Spout has a provision
to attach a vacuum hose to collect sawdust. Lift dust spout to connect hose.
Crown Molding Fence: DW7084
Used for precision cutting of crown molding.
Kerf Plate Blank: DW7055
Used to limit back side tear out of material or as a replacement kerf plate.
SAW BLADES: ALWAYS USE 12" SAW BLADES WITH 1" ARBOR HOLES. SPEED
RATING MUST BE AT LEAST 4800 RPM. Never use a smaller diameter blade. It will
not be guarded properly.

BLADE DESCRIPTIONS

APPLICATION MODEL #
Construction Saw Blades (thin kerf with anti-stick rim)
General Purpose DW3123
Fine Crosscuts DW3126
Fine Crosscuts DW3128
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts DW7648
Fine crosscuts DW7649
Ultra-fine crosscuts DW7650
Laminates DW7661
Solid surface
and plastics DW7668
Non-ferrous metals DW7666

Unpacking Your Saw

Check the contents of your miter saw carton to make sure that you have received all
parts. In addition to this instruction manual, the carton should contain:
1. One No. DW716 miter saw.
2. One D WALT 12" dia. saw blade
E
3. One blade wrench in wrench pocket shown in Figure 2.
4. One DW7053 dustbag (some models).

Specifications

CAPACITY OF CUT
50˚ miter left and right
48˚ bevel left and right
0˚ miter
Max. Height 3.6" (91.5mm) Result Width 7.2" (183mm)
Max. Width 7.9" (200.7mm) Result Height 2.9" (73.7mm)
45˚ miter
Max. Height 3.6" (91.5mm) Result Width 4.9" (125mm)
Max. Width 5.5" (140mm) Result Height 2.9" (73.7mm)
TOOTH
DIAMETER TEETH GRIND
12" 32 ATB
12" 60 ATB
12" 80 ATB
12" 60 ATB
12" 80 ATB
12" 96 ATB
12" 80 TCG
12" 80 Mod TCG
12" 80 TCG
45˚ bevel - Left
Max. Height 2.3" (58.4 mm) Result Width 7.4" (188mm)
Max. Width 7.9" (200.7mm) Result Height 1.9" (48.3 mm)
45˚ bevel - Right
Max. Width 7.9" (200.7mm) Result Height 1.1" (28mm)
Max. Height 1.6" (40.6 mm) Result Width 7.1" (180.3mm)
DW7080
END
PLATE
LOCKNUTS
DW7082
4
DW7051
TOP HOLE
(USE FOR
DW716)
KNOBS
BRACKET
DW7084