About Your Projector
Elevator button for height adjustments
Mounting holes for wall mount: Screw hole M3 x 6.5 mm depth.
Recommended torque <8 kgf-cm
Mounting hole for tripod: Insert nut 1/4"*20 UNC
Tilt adjustment wheel
Do not use the projector near appliances that generate a lot of heat.
Do not use the projector in areas where there is an excessive amount of dust. The
dust may cause the system to fail and the projector will automatically shut down.
Ensure that the projector is mounted in a well-ventilated area.
Do not block the ventilation slots and openings on the projector.
Your Dell Projector