The display settings menu provides the following options:
the image left.
match the frequency of your computer's graphics card. If you see a vertical
flickering wave, use the Frequency control to minimize the bars. This is a
card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.
image appears. Options are: Origin, 16:9, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
•16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3 image.
Using Your Projector
Select and press
Allows you to change the display data clock frequency to
Synchronize the phase of the display signal with the graphic
Allows you to select the aspect ratio to adjust how the
to zoom and view the image.
to move the image right and
to move the image up and
Adjust the image scale by pressing
to view on your remote control
to navigate the projection screen.
to activate display settings.
to move the
to activate the Zoom