Dell Inspiron 710M Owner's Manual page 48

• If failures are detected during the Pre-boot System Assessment, write down the error
code(s) and contact Dell (see page 89) before continuing on to the Dell Diagnostics.
If the Pre-boot System Assessment completes successfully, you receive the message
Dell Diagnostic Utility Partition. Press any key to continue
5 Press any key to start the Dell Diagnostics from the diagnostics utility partition on your
hard drive.
Dell Diagnostics Main Menu
1 After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the
option you want.
Option
Express Test
Extended Test
Custom Test
Symptom Tree
2 If a problem is encountered during a test, a message appears with an error code and a
description of the problem. Write down the error code and problem description and follow
the instructions on the screen.
If you cannot resolve the error condition, contact Dell (see page 89).
NOTE:
The Service Tag for your computer is located at the top of each test screen. If you contact Dell,
technical support will ask for your Service Tag.
3 If you run a test from the Custom Test or Symptom Tree option, click the applicable tab
described in the following table for more information.
Tab
Results
Errors
48
Solving Problems
Function
Performs a quick test of devices. This test typically takes
10 to 20 minutes and requires no interaction on your
part. Run Express Test first to increase the possibility of
tracing the problem quickly.
Performs a thorough check of devices. This test typically
takes an hour or more and requires you to answer
questions periodically.
Tests a specific device. You can customize the tests you
want to run.
Lists the most common symptoms encountered and
allows you to select a test based on the symptom of the
problem you are having.
Function
Displays the results of the test and any error
conditions encountered.
Displays error conditions encountered, error codes, and the
problem description.
Booting
.