Appletalk/Lpr Printing For Mac Osx - D-Link DP-G310 Manual

Wireless g print server

Hide thumbs Also See for DP-G310:

Table of Contents

DP-G310 User's Manual

Apple Talk/LPR Printing for Mac OS X

Note: Mac OS printing with this print server is supported by PostScript printers only!

With Mac OSX you can use AppleTalk or LPR printers using IP protocols for printing through Print Servers. Follow

the instructions below for setting up the Print Server. After attaching the Print Server to your network using the

directions provided in the Quick Installation Guide, change the IP address of your Macintosh to access the Print

Server's web conﬁguration.

Open your System Preferences window

and Click Network.

At the Conﬁgure pull-down menu, select Manually.

The default IP address of the Print Server is

192.168.0.10. Manually change your IP Address to

102.168.0.x, where x is any number between 1 and

254 (except 10 which is the IP Address of the Print

Server). The IP Addresses and Subnet Mask shown

here are examples only.

Select the AppleTalk tab in this window

and check Make AppleTalk Active.

D-Link Systems, Inc.

TCP/IP Printing for Macintosh OS X

Table of Contents