Static Ip - D-Link Xtreme N Duo DAP-1522 User Manual

Section  - Configuration
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in
the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Access
point will not accept the IP address if it is not in this format.
LAN Connection
Use the drop-down menu to select Static IP if
Type:
your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. Select
Dynamic IP (DHCP) to automatically assign an
IP address to the computers on the LAN/private
network.
Access Point IP
Enter the IP address of the access point. The default
Address:
IP address is 192.168.0.50. If you change the IP
address, once you click Apply, you will need to enter
the new IP address in your browser to get back into
the configuration utility.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Default Gateway:
Enter the Gateway assigned by your ISP.
Device Name:
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than
one D-Link device within the subnet.
D-Link DAP-15 User Manual

Static IP