Appendix G: Trend Micro Protectlink Gateway Service; Overview; How To Access The Web-Based Utility; How To Purchase, Register, Or Activate The Service - Cisco RV016 User Manual

Appendix G
Appendix G:
Trend Micro ProtectLink
Gateway Service

Overview

The optional Trend Micro ProtectLink Gateway service
provides security for your network. It checks e-mail
messages, filters website addresses (URLs), and blocks
potentially malicious websites. (To purchase a license for
this service, contact your Linksys reseller.)
This appendix explains how to use this service.

How to Access the Web-Based Utility

1. For local access of the Router's web-based utility,
launch your web browser, and enter the Router's
default IP address, 192.168.1.1, in the Address field.
Press the Enter key.
Address Bar
NOTE: If the Remote Management feature on
the Firewall > General screen has been enabled,
then users with administrative privileges can
remotely access the web-based utility. Use
http://<WAN IP address of the Router>, or
use https://<WAN IP address of the Router> if
you have enabled the HTTPS feature.
2. A login screen prompts you for your User name and
Password. Enter admin in the User name field, and
enter admin in the Password field. (You can change
the Password on the Setup > Password screen.) Then
click OK.
Login Screen
10/100 16-Port VPN Router
Trend Micro ProtectLink Gateway Service
How to Purchase, Register, or Activate the
Service
You can purchase, register, or activate the service using
the System Summary or ProtectLink screen.

System Summary

System Summary (ProtectLink Available)
Follow the instructions for the appropriate option:
Go buy
•
Register
•
Activate
•
Trend Micro ProtectLink Gateway
NOTE:
If the Trend Micro ProtectLink Gateway
options are not displayed on the System
Summary screen, upgrade the Router's firmware.
Refer to "Appendix F: Firmware Upgrade" for
instructions.
Go buy To purchase a license to use this service, click Go
buy. You will be redirected to a list of Linksys resellers on the
Linksys website. Then follow the on-screen instructions.
Register If you already have a license, click Register. You
will be redirected to the Trend Micro ProtectLink Gateway
website. Then follow the on-screen instructions.
80