Subscribe to Our Youtube Channel
Related Manuals for Teison TS-EVC Series
Summary of Contents for Teison TS-EVC Series
-
Page 1: Ts-Evc Series Smart Mini Ac Charging Station
TS-EVC Series Smart Mini AC Charging Station User Manual Ver 1.0.0 Taisheng Energy Technology Co., Ltd. August 2024... -
Page 2: Scope Of Application
Instruction Manual Thank you for using our company's TS-EVC series Smart Mini AC charging pile . Our products will bring you better charging services and safer charging guarantees. Scope of application This manual is applicable to the use of TS-EVC series Smart Mini AC charging piles . -
Page 3: Safety Tips
Energy Technology Co., Ltd. Safety Tips ⚫ This safety notice is applicable to all operations of the TS-EVC series Smart Mini AC charging pile. Before installing and debugging the charger, you should read this instruction manual carefully. The instruction manual contains important information that is conducive to the normal operation of the equipment and avoids incorrect operation. - Page 4 warn ⚫ Only certified professionals who are familiar with electrical regulations and professionally engaged in electrical work are allowed to install and maintain this equipment. ⚫ This device is a high-voltage device. Do not perform maintenance work when it is powered on. After cutting off the high-voltage power supply of the device, you must perform safety measures such as power testing and grounding to ensure that the device is power-free before you can perform maintenance on the device.
- Page 5 instruction manual. ⚫ Any defective component must be replaced with an identical component. hint ⚫ Please place this manual in a conspicuous place near the equipment to ensure that operators can easily read it. ⚫ Before installing and debugging the charging pile, please be sure to carefully read the safety rules and warnings, as well as all warning signs posted on the equipment.
-
Page 6: Table Of Contents
Table of contents TS-EVC Series Smart Mini AC Charging Station ..............1 1、Overview............................. 7 1.1. Product Introduction ....................7 1.2. Performance characteristics ................... 7 1.3. Usage Environment ....................... 8 1.4. Technical Parameters ....................9 2、Equipment principle and technical indicators ............11 2.1. -
Page 7: 1、Overview
Figure 1.1. TS-EVC Series Smart Mini AC Charging Station (reference picture) 1.2. Performance characteristics （1）Convenient installation: The device is small and light, and can be installed by one person;... -
Page 8: Usage Environment
of the device can be customized free of charge to meet the user's brand promotion needs; （3）Smart response: The device is highly intelligent and can be controlled through mobile phone APP, card reader and OCPP platform . （4）High-level protection: Protection level IP55, with excellent waterproof, dustproof and explosion-proof functions, and can operate stably under ambient temperature of -30℃~50℃... -
Page 9: Technical Parameters
Altitude ≤2000 Cooling method Natural air cooling ﹣ The installation site must not have explosive hazardous media, and the surrounding media must Surrounding medium ﹣ not contain harmful gases and conductive media that corrode metals and damage insulation. Note: When the equipment needs to work in a special environment, please provide specific environmental parameters in advance so that the on-site environmental conditions can be fully considered during product design. - Page 10 Credit Card RFID Optional Configuration Network connection ETH、4G Credit Card 3 RFID cards Load Management RS485 Load Balancer Installation Column...
-
Page 11: 2、Equipment Principle And Technical Indicators
2、Equipment principle and technical indicators 2.1. Electrical principle The TS-EVC series AC pile inputs 240V AC power. After passing through the internal circuit breaker, the main control board of the device judges the corresponding signal and transmits the electric energy to the AC charging gun, and finally connects to the electric vehicle through the charging gun for charging. -
Page 12: Protection Logic
The internal components of the equipment are selected from industrial grade and treated with three protections, with good moisture resistance, salt spray resistance rust resistance. 2.2.2. Protection logic Conservation Project Protection Logic Overvoltage protection threshold: 275±5V Numeric Recovery threshold: 265V±5V When the voltage is higher than the protection threshold Overvoltage for 2S, the protection process begins. - Page 13 4th time is irrecoverable, you need to power off and restart before you can use it, the time limit is 1 hour; Level 2 overcurrent: 5S after exceeding the protection threshold, the protection is activated. At this time, PWM is turned off and the relay is disconnected after S2 on the vehicle side is disconnected.
-
Page 14: 3、Equipment Operating Instructions
3、Equipment operating instructions 3.1. Start charging 3.1.1. First start Before starting the equipment for the first time after installation, the following checks should be performed: 1) Check if any screws on the equipment casing are loose or missing ; 2) Check whether the device casing has cracks or deformation ; 3) The equipment cable has wireless skin damage;... -
Page 15: Normal Shutdown Operation
Before starting charging, please check whether the device indicator light is blue and solid. Start charging steps: 1）Insert the charging gun into the corresponding port of the electric vehicle and confirm that it is fully inserted. You will hear a crisp "click" sound when it is fully inserted. 2）Select the corresponding start-up method;... -
Page 16: Abnormal Shutdown Operation
Stop on the app to stop charging; the device will then turn on the blue light, and you can then unplug the charging gun and reset it; Note: The charging gun can only be unplugged when the indicator light meets the instructions in the table. If the indicator light status does not match, please contact the manufacturer's technical staff in time for processing 3.1.4. - Page 17 3）Device shutdown...
-
Page 18: 4、Equipment Structure And Installation
4、Equipment structure and installation 4.1. Installation drawings and steps Refer to existing instructions 4.2. Interface requirements Line interface Specification Adapter terminal type Image Captions Color L IN(L1_IN) 10 square/60A brown RNB8-6L,62A N IN(L2 IN) 10 square/60A blue RNB8-6L,62A Yellow PE_IN 10 square/60A RNB8-6L,62A Green... -
Page 19: Wiring Steps
4.3. Wiring steps (1) The incoming lines L (live line) and N/L2 (neutral line/live line 2) are fixed on the main control board L_IN and N_IN respectively; (2) The charging gun/electric lock terminal L passes through the leakage coil and the current coil and is fixed to the main control board L_OUT;... -
Page 20: Dip Switch Settings
(1) 4G module, STOP emergency stop, RFID card module, LOCKER electric lock, and DSLED digital screen are all optional. (2) DIP switch settings SET_ID Functional Description Remark SET_ID0 reserve SET_ID1 reserve SET_ID2 reserve SET_ID3 reserve... -
Page 21: 5、Equipment Packaging, Transportation And Storage
5、Equipment packaging, transportation and storage 5.1. Packaging The packaging should take into account the requirements of moisture-proof, dust-proof and shock-proof; all parts are shipped together in the pile; the pile body is covered with a plastic bag and supported by foam all around to ensure that the product does not move in the packaging to avoid damage during transportation. -
Page 22: Storage
still be protected from direct sunlight and rain erosion during transportation. 5.3. Storage If the product is not used immediately after purchase and needs to be stored for a short or long term, it is recommended to store the equipment in a clean, dry, well-ventilated indoor place at 5℃... - Page 23 Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 24 different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
- Page 25 (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme a la norme CAN ICES (B)/NMB (B). Cet appareil contient des emetteurs / recepteurs exempt (s) de licence qui sont conformes aux RSS exemptes de licence d'Innovation, Sciences et Developpement economique Canada.
Need help?
Do you have a question about the TS-EVC Series and is the answer not in the manual?
Questions and answers