Advertisement
Installation Instructions
Barometric Relief Damper
Foundation™ Packaged Rooftop Units
3 to 5 Tons
Model Number:
BAYBARO320*
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.
August 2024
Used With:
E/GB*036-060
E/GD*036-060
ACC-SVN198D-EN
SAFETY WARNING
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trane Foundation BAYBARO320 Series
Summary of Contents for Trane Foundation BAYBARO320 Series
- Page 1 Installation Instructions Barometric Relief Damper Foundation™ Packaged Rooftop Units 3 to 5 Tons Model Number: Used With: BAYBARO320* E/GB*036-060 E/GD*036-060 SAFETY WARNING Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
-
Page 2: Warnings, Cautions, And Notices
When working with or around hazardous chemicals, these compounds have the same potential impact to the ALWAYS refer to the appropriate SDS and OSHA/GHS environment. Trane advocates the responsible handling of all (Global Harmonized System of Classification and refrigerants. Labeling of Chemicals) guidelines for information on... - Page 3 Copyright This document and the information in it are the property of Trane, and may not be used or reproduced in whole or in part without written permission. Trane reserves the right to revise this publication at any time, and to make changes to its content without obligation to notify any person of such revision or change.
-
Page 4: General Information
General Information Inspection Figure 1. Parts (field installed kit) 1. Check carefully for shipping damage. If any damage is Installation kit with Label found, report it immediately, and file a claim against the screws transportation company. Replace damaged parts with authorized parts only. -
Page 5: Installation
Installation Figure 3. Internal hood assembly WARNING Hazardous Service Procedures! Failure to follow all precautions in this manual and on the tags, stickers, and labels could result in death or Tape serious injury. Technicians, in order to protect themselves from potential electrical, mechanical, and chemical hazards, MUST follow precautions in this manual and on the tags, stickers, and labels, as well as the following... - Page 6 Installation Figure 5. Outer hood assembly Figure 7. Attach internal hood assembly to unit Screws 7. Apply gasket 14 to return opening around the dimples as shown in Figure 8, p. 6 5. Build top block off assembly as shown in Figure 6, p.
- Page 7 Installation Figure 9. Attach outer hood assembly to unit Figure 10. Attach top block-off assembly 9. Attach top block-off assembly built in Step 5 to unit using six screws. See Figure 10, p. ACC-SVN198D-EN...
- Page 8 For more information, please visit trane.com or americanstandardair.com. Trane and American Standard have a policy of continuous product and product data improvement and reserve the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.
Need help?
Do you have a question about the Foundation BAYBARO320 Series and is the answer not in the manual?
Questions and answers