Turning On Your Phone - Motorola V3C Manual

Hide thumbs Also See for V3C:
Table of Contents

Advertisement

Available languages

Available languages

Tip: You can safely leave the charger
connected to the phone after charging is
complete. This will not damage the battery.
Note: When you charge the battery, the
battery level indicator in the upper right corner
of the display shows how much of the
charging process is complete. At least 1
segment of the battery level indicator must be
visible to ensure full phone functionality while
charging.
Charging from a Computer
You can charge your battery by connecting a
cable from your phone's mini-USB port to a
high-power USB port on a computer (not a
low-power one such as the USB port on your
keyboard or bus-powered USB hub). Typically,
USB high-power ports are located directly on
your computer.
Both your phone and the computer must be
turned on, and your computer must have the
correct software drivers installed. Cables and
software drivers are available in Motorola
Original data kits, sold separately.

Turning On Your Phone

1 Open your phone.
2 Press and hold the
power key for
3 seconds.
The phone may
require several
seconds to power on.
3 If necessary, enter your 4-digit unlock
code (the last 4 digits of your phone
number) and press OK to unlock the
phone.
Getting Started
9

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Motv3msRazr v3c

Table of Contents