Table of Contents
Advertisement
Sending a Data or Fax Call
Use this procedure to send data or a fax from a connected
computer or hand-held device using a CSD or GPRS
network connection.
Action
1 Make sure that the phone is connected and
powered on.
2 Open the application (such as dial-up-networking
or fax) on your computer, and place the call
through the application.
Note: You cannot dial data or fax numbers
through your phone's keypad. You must dial
them through your computer, unless you are
making a talk then fax call (see following
section).
3 When the transfer is complete, end the call from
the connected device to close the connection.
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to a connected
computer or hand-held device.
Transferring the Data or Fax
Your phone notifies you when the data or fax call
arrives, and transfers the call to the connected device.
Use the application running on the device to answer
the call.
205
Advertisement
Table of Contents
