Ring Or Vibrate; Set Ringer Tone; Phone Lock - Motorola V3688 Manual

st211_en.bk : opt_menu.fm5 Page 53 Monday, August 23, 1999 10:24 AM
j Ring or Vibrate
This option sets the way your phone alerts you to an incoming
call. The options are:
• Ring Only - the phone will ring with the tone specified by
the Set Ringer Tone option.
• Vibrate Only - the phone will vibrate using VibraCall™.
• Vibrate Then Ring - the phone will vibrate twice and then
ring.
• No Ring or Vibrate - the phone will just display the Call
message.
AThe setting you choose also defines the type of alert for an
incoming SMS message (except that if you select Vibrate
Then Ring, your phone will just vibrate).
j Set Ringer Tone
This option sets the tone your phone will make when an
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone - Music Tone
When selected, your phone will produce one of these alternative
ringer tones.
AIf you select the Single Ring Tone option, the phone will
only ring once when a call is received.
j Set Ringer Tone 2
This option sets the tone your phone will make when an
incoming call is received on Line 2.
AThis option will not appear if you do not subscribe to Line 2.
j Phone Lock
This option is used to set, and change, the unlock code.
The unlock code can be set to protect your phone from
unauthorised use. It can be set to automatically lock your phone
each time it is switched on.
The unlock code is a four digit number which is set at
manufacture to 1234. This can be changed at any time by using
the 'change unlock code' option.
Automatic Lock
This option can be used to automatically lock your phone each
time it is switched on. The option has two settings, On or Off.
Lock Now
This option can be used to immediately lock your phone. Once
selected, your phone will be unusable until the unlock code is
entered.
Change Unlock Code
This option is used to change the unlock code.
After selecting this option, you will be asked to enter the current
security code before you can proceed.
You can now enter a four digit code to replace the old code.
ABy pressing the $ key, you can access this option even
when the phone is locked.
Using the Options Menu
53 English