Table of Contents
Advertisement
Press
M
> Insert 'n'
Notes:
• You can store a maximum of 32 digits per number for
a phonebook entry stored on the phone. The
maximum number may vary for entries stored on the
SIM card. Each character counts as one digit.
• You cannot store numbers that contain a w or n
character on the SIM card.
Recording a Voice Name For a
Phonebook Entry
You can record a voice name for a new or existing
phonebook entry. A voice name lets you call the
phonebook entry using voice dial (see page 16).
Note: You cannot record a voice name for an entry stored
on the SIM card.
Tip: Make your recording in a quiet location. Hold the
phone about four inches (10 centimeters) from your mouth,
and speak directly into the phone in a normal tone of voice.
Find the Feature
Do This
S
1 Press
+
2 Press VIEW (
)
+
3 Press EDIT (
)
S
4 Press
+
5 Press RECORD (
6 Press and release
the voice key and say
the entry's name (in
two seconds)
7 Press and release
the voice key and
repeat the name
-
8 Press DONE (
)
Dialing a Phonebook Entry
Use one of the following procedures to call a number (or
send a text message to an email address) stored in your
phonebook.
Phonebook List
Find the Feature
16
To
insert an n (number)
character
Your phone prompts you for a
number before dialing the
call. The number you enter is
inserted into the dialing
sequence in place of the n
character
M
> More > Phonebook
To
scroll to the entry
view entry details
edit the entry
scroll to Voice Name
)
begin recording
record the voice name
confirm the voice name
store the voice name
M
> More > Phonebook
Press
To
1 keypad key letter jump to entries that begin
with that letter (optional)
S
scroll to the entry
2
N
make the call
3
Voice Dial
Do This
Press and release the voice
key and say the entry's name
(in two seconds).
Storing Longer Numbers
A phonebook number can contain a maximum of 32 digits
and characters. You can create multiple phonebook entries
to store a dialing sequence that exceeds the 32-character
limit. Then you can send the entries in sequence to dial the
number.
To store a dialing sequence longer than 32 characters:
Do This
1 Create a phonebook entry to store the first part
of the dialing sequence (for example, the number
for your long-distance service provider).
2 Create a second phonebook entry to store the
next part of the dialing sequence (for example,
the country code and phone number for an
international call).
3 Repeat step 2 as necessary to store the entire
dialing sequence. (For example, create a third
phonebook entry to store your calling card
number and PIN number.)
To dial a dialing sequence stored as multiple phonebook
entries:
Do This
1 Dial the first phonebook entry. Perform any
pause or wait tasks, if necessary, to complete
the dialing sequence. Your phone returns to the
idle display.
M
> More > Phonebook to re-open the
2 Press
phonebook.
3 Highlight the second phonebook entry, then
M
> Send Tones to send the next portion of
press
the dialing sequence.
4 Repeat steps 2 and 3 as necessary to send the
entire dialing sequence.
Editing a Phonebook Entry
M
Find the Feature
Press
To
S
scroll to the entry
1
To
make the call
> More > Phonebook
Advertisement
Table of Contents
