Selecting The Display Size; Displaying The Grid Lines - Canon EOS 10D Instruction Manual

Selecting the Image Display Mode
You can change the size and method in which images are displayed.

Selecting the Display Size

You can select the image size from [Fit to window] (Fitting to the image display area), [50%
view], [100% view] (actual pixel size), and [200% view].
Select [View] menu Select the size to be set.
The image is displayed in the selected size.
When you display an enlarged image, you can change the display position by
dragging the image.
In the [Fit to window] display, if you double-click a section you want to enlarge, the display
changes to the [100% view] display. If you double-click on the image in the [50% view],
[100% view] or [200% view] display, the display changes to the [Fit to window] display.

Displaying the Grid Lines

You can display grid lines that allow you to check the horizontal or vertical level of the image.
Select [View] menu [Grid lines].
Grid lines are displayed on the image.
Performing the same operation again hides the grid lines.
You can specify the grid spacing (p.1-25).
Displaying the Edited Image and the Original at the Same Time
You can display the edited image and the original at the same time.
Select [View] menu [Before/after comparison].
A split window with the image before and after editing is displayed.
The way the image is displayed can be changed (p.1-25).
Changing the Display Position
You can also tile images vertically.
Select [View] menu [Change up/down/left/right].
Performing the same operation again tiles images horizontally.
Cover/Table of
Contents
Introduction
1
Displaying Thumbnail Images
and Performing Basic Edits
in the Main Window
Performing Detailed 2
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Image Window
Checking an 4
Image in the Quick
Check Window
Troubleshooting
Shortcut Key List
Index
2-3