Removing The Embroidery Unit - Brother ULT-2001 Operation Manual

Removing the Embroidery Unit

ill 6_09
1. Remove the embroidery frame.
Press either or
. The carriage will move to the removal position.
CAUTION
Always remove the embroidery frame before
pressing . Otherwise, the frame may strike
the embroidery foot, resulting in injury.
CAUTION
The embroidery unit will not fit in the storage case if
this step is not done.
2. Turn off the main power switch. Hold the back left side
of the embroidery unit. Hold down the release button,
and pull the embroidery unit away from the machine
as shown.
CAUTION
Be sure to turn off the main power switch. Otherwise,
the machine may be damaged.
Embroidery
, then press
5-7
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —