Polar 360 LEDs Battery Charging the battery Caring for your Polar 360 Keep your Polar 360 clean Storing Restarting and resetting To reset Polar 360 to factory settings Precautions Interference during training Health and training Warning Technical specification Polar 360...
For details on using the device with the app you are using, check out the user guide from the app’s developers. Setting up your Polar 360 Charge To charge your Polar 360, plug it into a powered USB port or a USB charger using the custom cable that came with the product set. ...
The Polar 360 has to be set up with your phone using the app, not in your phone's Bluetooth settings. If you have paired the device with your phone in your phone's Bluetooth settings, follow the instructions below to unpair the Bluetooth connection, and then set up the device using the app.
Page 5
You should regularly wash the device, the wristband and the skin on your arm – especially after you’ve been sweating. Use a mild soap and water solution and running water. For more information, see Caring for your Polar 360.
If you disconnect Polar 360 from the charger before it is set up and paired with a phone, it will continue to search for a connection to a phone for 30 minutes before going to sleep. This search is indicated by four clockwise rotating red LEDs which light up one at a time and with a faster rotation than during charging.
Keep the charging contacts of your device clean to effectively protect your device from oxidation and other possible damage caused by dirt and salt water (e.g. sweat or sea water). The best way to keep the charging contacts clean is to rinse the device after each training session with lukewarm tap water.
Caring for your Polar 360 Like any electronic device, the Polar 360 should be kept clean and treated with care. The instructions below will help you keep the device in peak condition and avoid any issues in charging and optical heart rate measurement.
Precautions The Polar 360 is designed to measure your heart rate, activity and sleep. No other use is intended or implied. The device should not be used for obtaining environmental measurements that require professional or industrial precision. We recommend washing the device and wristband regularly to avoid any skin problems caused by dirt.
If the training device does not work with the training equipment, it may be electrically too noisy for wireless heart rate measurement. Health and training Training may include some risk. Before beginning a regular training program, it is recommended that you answer the following questions concerning your health status.
Technical specification Polar 360 Model: 5T Battery type: 148 mAh Li-pol rechargeable battery Operating time: Up to 5 days of use on a single charge Operating temperature: -10 °C to +50 °C / 14 °F to 122 °F Materials: Sensor...
The purpose of this instruction is to inform the user of the device. The devices described are subject to change without prior notice due to the manufacturer’s continuous development program. Polar Electro Inc./Polar Electro Oy makes no representations or warranties with respect to this instruction or with respect to the devices described herein.
Page 13
Polar Electro Inc./Polar Electro Oy shall not be liable for any damages, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the use of this material or the devices described herein.
Need help?
Do you have a question about the 360 and is the answer not in the manual?
Questions and answers