Dialing Access Codes And Credit Card Numbers; Pause; Tone Or Pulse (Canada Only) - Brother MFC-9440CN User Manual

Dialing access codes and
credit card numbers
You can combine more than one Quick-Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored '555' on
Speed-Dial #003 and '7000' on Speed-Dial
#002. You can use them both to dial
'555-7000' if you press the following keys:
Press Search/Speed Dial, 003. Press
Search/Speed Dial, 002 and Black Start or
Color Start.
Numbers can be added manually by entering
them on the dial pad:
Press Search/Speed Dial, 003, 7001 (on the
dial pad), and Black Start or Color Start.
This would dial '555–7001'. You can also add
a pause by pressing the Redial/Pause key.

Pause

Press Redial/Pause to insert a 3.5-seconds
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.

Tone or pulse (Canada only)

If you have a Pulse dialing service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a
Press Hook.
b
Press # on the machine's control panel.
Any digits dialed after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialing service.
8
8
8
Dialing and storing numbers
8
59