Cleaning The Corona Wire - Brother DCP-8080DN User Manual

c
Wipe the laser scanner window (1) by
wiping it with a dry, lint-free soft cloth.
d
Put the drum unit and toner cartridge
assembly back in the machine.
e
Close the front cover.
f
Plug the machine's power cord back into
the AC power outlet first.Turn on the
machine's power switch.
96

Cleaning the corona wire

If you have print quality problems, clean the
corona wire as follows:
a
b
1
• We recommend that you place the drum
unit and toner cartridge assembly on a
clean, flat surface with a sheet of
disposable paper or cloth underneath it in
case you accidentally spill or scatter toner.
• Handle the toner cartridge carefully. If
toner scatters on your hands or clothes,
wipe or wash it off with cold water at once.
• To prevent damage to the machine
caused by static electricity, DO NOT touch
the electrodes shown in the illustration.
Turn off the machine's power switch.
Disconnect all cables, and then unplug
the power cord from the AC power
outlet.
Open the front cover and slowly take out
the drum unit and toner cartridge
assembly.
IMPORTANT
C