3
Turn on the Bluetooth function of
your Bluetooth device.
4
Pair the earpieces with your
Bluetooth device, refer to the user
manual of your Bluetooth device.
Note
y After powering on, if the earpieces can not find
any previously connected Bluetooth device,
please put them into pairing mode (press both
R & L MFT on the earpieces for 3 seconds with
both earpieces inside and the box open).
The following example shows you how
to pair the earpieces with your Bluetooth
device.
1
Turn on the Bluetooth function of
your Bluetooth device, select Philips
TAT2149.
2
Enter the earpieces' password "0000"
(4 zeros) if prompted. For those
devices featuring Bluetooth 3.0 or
higher, there is no need to enter a
password.
Single earpiece (Mono mode)
Take either right or left earpiece out from
charging box for Mono use. The earpiece
will power on automatically.
Note
y Take the second earpiece from the charging box
and they will pair with each other automatically.
8
EN
Philips TAT2149
Pair the earpieces with
another Bluetooth device
If you want to pair another Bluetooth
device with the earpieces, just put them
into pairing mode, (press both R & L MFT
on the earpieces for 3 seconds with both
earpieces inside and the box open), then
discover the second device as per normal
pairing.
Note
y The earpieces store 4 devices in the memory. If
you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.
Multi-point connection
Pairing
•
Pairing the headphones to 2 devices,
e.g. mobile phone and notebook.
Switch between device
•
At anytime, you can only listen to
music from 1 device. Another device
will be for phone call.
•
Pause the audio from 1 device and
then start to play audio from the
another device.
Note
y When streaming audio from Device 1, receiving
a call from Device 2 will automatically pause
Device 1 playback. And the call will be routed
automatically to headphones.
y Ending the call will automatically resume
playback from device 1.
03"
Need help?
Do you have a question about the TAT2149 and is the answer not in the manual?