Connect Power - Honeywell Cob02 Installation Manual
Charge-only base
Table of Contents
Connect Power
Connect the power adapter to the Charge-Only Base, then plug
the power supply into an AC power outlet. Make sure the AC
power outlet voltage is the same as the power supply.
Use only a Listed Limited Power Source (LPS) or Class
2 type power supply with output rated 5 to 5.2Vdc, 1A.
We recommend use of Honeywell power adapters. Use
of any non-Honeywell power adapters may cause
damage not covered by the warranty.
2
Table of Contents
Need help?
Do you have a question about the COB02 and is the answer not in the manual?