1.3
Monitor introduction
1.3.1
Front/side view
6
1.
(
• Turns on the OSD menu. Enacts the selected OSD menu item.
• Increases/Decreases values or moves your selection up/down/left/
right.
• Turns on the OSD menu when the monitor enters standby mode or
displays the "NO SIGNAL" message.
• Move and hold the button downward for over 5 seconds to enable/disable
the Key Lock function.
2.
button
• Exits the OSD menu item.
• Turns on the OSD menu when the monitor enters standby mode or
displays the "NO SIGNAL" message.
3.
Shortcut 1 button:
• Default: Frame Rate Boost.
• To change the shortcut function, go to the MyFavorite > Shortcut >
Shortcut 1 menu.
• Turns on the OSD menu when the monitor enters standby mode or
displays the "NO SIGNAL" message.
4.
Shortcut 2 button:
1-2
5-way) button:
1
2
3
4
5
Chapter 1: Product introduction
Need help?
Do you have a question about the ROG STRIX XG27UCG and is the answer not in the manual?
Questions and answers