Removing The Film.12; Rewinding The Film In Mid-Roll - Canon SURESHOT 130u Instructions Manual

Loading the Film
• A film speed of ISO 400 is recommended.
• The film speed is set to ISO 25 when non-DX
film is loaded If the film does not have a DX-
code, insert it into the film compartment, close
the back cover and press the shutter button
once or twice.
• For slide (reversal) film, you can use DX-
coded film speeds of ISO 25, 50, 100, 200,
400. 800. 1600 and 3200
Removing the Film
—i ,-^ • The film rewinds
© 0 automatically when it
1
^^ reaches the end
- When blinks, open the
back cover and remove the
film
Rewinding the Film in Mid-roll
• Use the strap buckle pin on
the strap buckle to press
the ^0 button on the
bottom of the camera
• Hold the button down until
the film starts to rewind.
[10-12