Motorola MOTO Q 9H User Manual page 66

modem-link with a cable
Note: Do not connect your data cable to your
phone and computer until the following steps
tell you to do so.
To use a USB cable with your phone to
connect with modem-link to a network,
first you must install networking drivers
onto your computer.
On your computer:
1 Place the provided Getting Started Disc
into the CD Drive on your computer.
Your computer automatically launches
the Getting Started Disc.
Note: If you do not have the Getting
Started Disc, or want the latest version
of the device and computer drivers, go to
www.motorola.com/support/9h.
64 connections
2 In the Getting Started Disc application, go
to the Additional Tools screen and select
the Dial-Up Networking Software.
3 Follow the prompts as directed to install
the drivers onto your computer.
On your phone:
Now, you need to enable modem-link on your
phone and install phone drivers:
4 On your phone, press Start > Settings >
Connections > USB Device Type > Modem,
and press Done.
5 Using the USB data cable, connect the
phone to your PC.
The driver is installed on your computer
and ready for setting up a network
connection.